PLANET MODBUS průmyslová brána RS-232/422/485 na IP, 1x COM, 100Base-FX SC SM 30km, RTU/ACSII, -40až+75°C, 9-48VDC,IP30

Industrial MODBUS gateway with conversion 1x RS-232 (DB9) + 1x 4-pin terminal block RS-485/422 to TCP/IP protocol (singlemode, SC duplex, 100Base-FX), range 30 km. Serial communication type is selectable RTU/ASCII, master/slave.
Redundant power supply in range DC 9-48 V / AC 24 V, protection IP30, DIN rail or wall mounting, metal housing, operating temperature -40 to +75 °C.
Serial communication transmission over IP protocol is particularly used for data collection, control systems, SCADA/HMI systems and camera system control. It also replaces physical conversion of serial protocol to other transmission media. Practically unlimited extension of serial communication range.

Industrial Ethernet devices are designed for demanding operating conditions with wide operating temperature range, uncertain power supply and frequent vibrations, allowing deployment of well-known Ethernet technology in industrial environments. It is also suitable for installations in outdoor cabinets with large operating temperature fluctuations (typically wireless and MAN ISP applications).

BASIC SPECIFICATIONS

Network properties:

• 1x serial connector DB9 (RS-232)
• 1x 4-pin terminal block (RS-485 / RS-422)
• 1x SC (duplex), single-mode, range 30 km, 9/125 µm, 100Base-FX
• Web, Telnet, VCOM Utility management, SNMP v1/v2c, SNMP Trap and UNI-NMS management
• Utility for automatic discovery - Planet Smart Discovery
• LED indicators for operation diagnostics
• Parity: even, odd, none, space, mark
• Transmission speed: 50 b/s - 921 kb/s
• Protocol support: Modbus TCP, Modbus RTU, Modbus ASCII, IP, ARP, DHCP, DNS
• For master up to 32 slave TCP connections, for slave up to 32 TCP connections

Operating modes:

• RTU Master
• RTU Slave
• ASCII Master
• ASCII Slave

Signal wiring

• RS-232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
• RS-422: Tx+, Tx-, Rx+, Rx-, GND
• RS-485 (4 wire): Tx+, Tx-, Rx+, Rx-, GND
• RS-485 (2 wire): Data A (+), Data B (-), GND

Physical properties:

Ports: 1x SC duplex (singlemode), 1x COM (DB-9 type) serial port (RS-232), 1x 4-pin terminal block (RS-422/485)
MODBUS support: yes
Protection: IP30, all-metal housing
Power supply: DC 9-48 V or AC 24 V external source, redundant power supply, consumption up to 6 W (source not included)
Protection: overvoltage protection up to 2 kV, ESD up to 6 kV
Operating temperature: -40 to +75 °C, humidity up to 95 %
Dimensions: 135 x 87.5 x 32 mm
Weight: 391 g

Industrial properties:
device is resistant to drops (IEC-60068-2-32) from height of 75 cm on all impact parts
device is resistant to vibrations (IEC-60068-2-6)
device is resistant to overload short-term acceleration 50g, long-term 4g, (IEC-60068-2-27)
electrical safety according to CE EN-60950

EMC Electromagnetic compatibility (EMI):
ČSN EN 55032:2015+AC 2016 - Electromagnetic compatibility of multimedia equipment

EMC immunity requirements (EMS):
ČSN EN 55024 A1:2015 - Information technology equipment
ČSN EN 55035:2017 - Electromagnetic compatibility of multimedia equipment
ČSN EN 61000-4-2:2008 - Electrostatic discharge ESD
ČSN EN 61000-4-3 A2:2010 - Radiated high-frequency electromagnetic field
ČSN EN 61000-4-4:2012 - Fast electrical transients/burst EFT
ČSN EN 61000-4-5:2014 - Surge impulse and overvoltage
ČSN EN 61000-4-6:2013 - Immunity to conducted disturbances induced by high-frequency fields
ČSN EN 61000-4-8:2009 - Power frequency magnetic field
ČSN EN 61000-4-11:2004 - Voltage dips, short interruptions and voltage variations

Specifications (v1.1)

Specifications

Manual

Datasheet

Other downloads