Teltonika LTE Wi-Fi Router RUT951, 2,4 GHz, 802.11b/g/n, 2/3/4G, LTE

RUT951 took the best features from one of the most popular Teltonika Networks cellular routers - RUT950

RUT951 is a professional industrial 4G LTE Wi-Fi router for IoT applications. Ruggedized mobile router delivers high performance cellular communication in harsh and wide operating temperature range environments. Remote management platform RMS ready to deliver the value of M2M and IoT networking applications. Router equipped with four ethernet ports, external 2xSIM holders, digital input/output and signal strength status LEDs indicators. External SMA antenna connectors make it possible to attach desired antennas. RUT950 is a professional cat4 LTE router empowered by RutOS a unified operating system for all Teltonika routers for the most demanding mobile networking applications. Ensure your business continuity with Dual-SIM and 4G failover.

MOBILE
Mobile module: 4G (LTE) (150 Mbps), 3G (42 Mbps), 2G (236.8 kbps)
SIM switch: 2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, SIM idle protection
Status: Signal strength, SINR, RSRP, RSRQ, Bytes sent/received
Bridge: Direct connection (bridge) between mobile ISP and device on LAN
SMS: SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP
Black/White list: Operator black/white list
Band management: Band lock, Used band status display

WIRELESS
Wireless mode: IEEE 802.11b/g/n, Access Point (AP), Station (STA)
WiFi: WPA2-Enterprise (with external/internal Radius server), WPA2-PSK, WPA-PSK, WEP, MAC Filter
WiFi security: WPA2-Enterprise - PEAP, TLS, TTLS. AES-CCMP, TKIP, Auto Cipher modes. Client separation
SSID: SSID stealth mode and access control based on MAC address
WiFi users: Up to 100 simultaneous connections
Hotspot: Captive portal (Hotspot), internal/external Radius server, built in customizable landing page

ETHERNET
WAN: 1 x WAN port (can be configured to LAN) 10/100 Mbps (IEEE 802.3, 802.3u) auto MDI/MDIX
LAN: 3 x LAN ports, 10/100 Mbps (IEEE 802.3, 802.3u), auto MDI/MDIX

NETWORK
Routing: Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2)
Network protocols: TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMNP, MQTT, Wake On Lan
VoIP passthrough support: H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets
Connection monitoring: Ping Reboot, Periodic Reboot, LCP and ICMP for link inspection
Firewall: Port forward, traffic rules, custom rules
DHCP: Static and dynamic IP alocation, DHCP Relayd
QoS: Traffic priority quening by source/destination, service, protocol or port, traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e
DDNS: Supported >25 service providers, others can be configured manually
Network backup: VRRP, Mobile, Wired and WiFi WAN options, each of which can be used as backup, using automatic Failover

SECURITY
Authentication: Pre-shared key, digital certificates, X.509 certificates
Firewall: Pre-configured firewall rules can be enabled via web-ui, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T
Attack prevention: DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention ( SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
WiFi security: WPA2-Enterprise – PEAP, EAP-TLS, TLS, TTLS. AES-CCMP, TKIP, Auto Cipher modes. Client separation
VLAN: Port based and tag based VLAN separation
Mobile quota control: Set up custom data limits for both SIM cards
WEB filter: Blacklist for blocking out unwanted websites, whitelist for specifying allowed sites only
Access control: Flexible access control of TCP, UDP, ICMP packets, MAC address filter

VPN
OpenVPN: Multiple clients and server can be running simultaneously, 12 encryption methods
OpenVPN Encryption: DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC
IPsec: IKEv1, IKEv2, supports up to 4 x VPN IPsec tunnels (instances), with 5 encryption methods (DES, 3DES, AES128, AES192, AES256)
Support: GRE, PPTP, L2TP, Stunnel, SSTP

MONITORING & MANAGEMENT
WEB UI: HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, event log, system log, kernel log
FOTA: Firmware update from sever, automatic notification
SSH: SSH (v1, v2)
SMS: send/read SMS via HTTP POST/GET (status/configuration)
TR-069: OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem
MQTT: MQTT Broker, MQTT publisher
SNMP: SNMP (v1, v2, v3), SNMP trap
JSON-RPC: Management API over HTTP/HTTPS
MODBUS: MODBUS TCP status/control
RMS: Teltonika Remote Management System (RMS)

SYSTEM CHARACTERISTICS
CPU: Mediatek MT7628, 580 MHz
RAM: 128 MB, DDR2
FLASH memory: 16 MB SPI Flash

FIRMWARE CUSTOMIZATION
Operating system: RutOS (OpenWrt based Linux OS)
Supported languages: Busybox shell, Lua, C, C++
Development tools: GPL package with build environment provided

POWER
Connector: 4 pin industrial DC power socket
Input voltage range: 9 – 30 VDC (4 pin industrial socket)
PoE (passive): Passive PoE (not compatible with IEEE802.3af/at)
Power consumption: < 2 W idle, < 7 W Max

PHYSICAL INTERFACE AND SPECIFICATION
Ethernet: 4 x RJ45 ports, 10/100 Mbps
SIM: 2 x SIM slots (Mini SIM - 2FF), 1.8 V/3 V, external SIM holders
Power: 4 pin industrial DC power socket
Input/Output: 2 programmable Inputs/Outputs
Anntenas: 2 x SMA for LTE, 2 x RP-SMA for WiFi antenna connectors
Casing material: Aluminium housing, plastic panels
Dimensions: 110 x 100 x 50 mm
Weight: 287 g
Mounting options: DIN rail (can be mounted on two sides), flat surface placement
Operating temperature: -40 °C to 75 °C
Ingress Protection Rating: IP30
MTBF: 270000 h

More information in manual/datasheet or wiki.teltonika-networks.com/view/RUT950.