Mikrotik Cloud Switch CRS504-4XQ-OUT, 650 MHz CPU, 128 MB RAM, 1x LAN, 4x QSFP28, 2x PSU, L5, outdoor

Affordable, compact, energy-efficient 100 Gbps networking anytime, ANYWHERE! IP66 weatherproof enclosure, 4x 100 Gigabit ports, multiple powering options.

• 4x 100 Gigabit QSFP28 ports
• Backward compatible with 40G, 25G, 10G, and 1G connections
• Weatherproof IP66 enclosure
• 16x 25Gigabit Marvell Prestera switch chip
• Compatible with 40G, 25G, 10G, and 1G fiber connections
• Multiple powering options: PoE-in, DC jack, 2-pin terminal
• Management & Console ports

Should high-quality 100 Gigabit connectivity be limited to indoors only? Definitely not! That’s why we created the CRS504-4XQ-OUT: a versatile, cost-effective, ultra-fast weatherproof switch for all your outdoor needs.

At the core of this masterpiece, we have an incredible Marvell Prestera switch chip. And there are four 100 Gigabit QSFP28 ports. Use them to connect other 100 Gigabit devices or grab a breakout cable to connect multiple 25 Gigabit devices. Here’s where the speedy switch chip really shines: each port is connected to four 25 Gigabit lines. That means you’re getting up to 16 high-speed fiber interfaces from a single outdoor switch! You can mix and match all kinds of connections this way: 100 Gigabits on one port, 40 Gigabits on the other, 4x25 Gigabits on the third, and maybe even some 10G or 1G cables on the fourth. And all this versatility comes in a sturdy, weatherproof IP66-rated enclosure. This rating proves it’s strong enough to handle powerful water jets from any direction!

When it comes to outdoor event planning, you can never be too prepared. So having multiple powering options is a must! And CRS504-4XQ-OUT has got you covered: there’s a standard DC jack, a 2-pin terminal, and 802.3bt PoE-in. We’ve also kept the good old management and console ports – to help you deal with any unexpected situations.

Performance-wise, CRS504-4XQ-OUT is a real workhorse that can handle VLANs, ACL, MLAG, Jumbo frames, and so much more – even some L3 hardware offloading! The mighty Marvell Prestera switch chip dominates most tasks without blowing the power consumption up – only up to 25W (without attachments).

Stop waiting for the perfect weather – invest in the perfect tools!

SPECIFICATIONS

CPU: Qualcomm QCA9531, 650 MHz, single-core
Switch chip and memory/storage: Marvell Prestera (98DX4310), 128 MB RAM, 32 MB Flash
Ports: 4x 100G QSFP28, 1x RJ-45 (100 Mbps), 1x console port (RJ-45)
Operating system: MikroTik RouterOS v7 (License level L5)
PoE support: yes, 1x PoE-in (43-57 V), active 802.3bt
Power: PoE-in, DC jack (36-57 V), 2-pin terminal (36-57 V)
Dimensions: 330 x 200 x 70 mm

Useful links and videos:

Declaration of Conformity + User Manual

Device Setup via Quick Set Guide

Mobile App for Device Control

Resetting Device, Reset Button Functions

RouterOS Recovery using Netinstall Utility

NAT Configuration

Load Balancing Configuration (Traffic Splitting Between Multiple Internet Connections)

Failover Setup (Switching to Backup Link in Case of Failure)

Multiple uplinks using PCC & Load balancing

Static NAT & RouterOS

MikroTips: Netinstall