MikroTik managed Switch/UPS netPower Lite 8P, 8x GbE PoE+, 2x 10Gb SFP+, SwOS, PSU (PoE budget 120W)

Compact PoE switch with integrated UPS and smart battery charger for continuous operation of CCTV cameras and access points.

Robust network switch with eight Gigabit Ethernet ports supporting 802.3af/at PoE-Out and two 10G SFP+ uplinks for high-speed connectivity. The device features an advanced UPS system with automatic switching and intelligent battery charger that ensures continuous power supply to PoE devices even during power outages.

The switch supports a wide range of external batteries including flooded, AGM, gel and LiFePO4 types with BMS. Charging is performed intelligently in three phases (Bulk, Absorption, Float) with automatic temperature compensation. IP55 rated enclosure and extreme operating range of -40 to +70 °C make the device suitable for demanding outdoor installations.

Intelligent power management
The switch can deliver high-voltage PoE even from low-voltage DC sources. During limited power input, PoE device power is automatically prioritized – battery charging slows down to keep critical devices online. Total switch power consumption can reach up to 181 W.

Three-stage battery charging
The charger operates in three modes: Bulk (fast charging), Absorption (steady charging) and Float (maintenance voltage). Temperature sensor automatically adjusts voltage for lead-acid batteries and blocks charging at temperatures outside safe range, extending battery life.

Safety notice
LiFePO4 batteries require external BMS system with overcharge/discharge protection and temperature protection. Lead-acid batteries require ventilation due to hydrogen release during charging. Battery negative terminal must not be connected to ground potential – it is used for current measurement and charger feedback.

Typical deployment
Ideal for WISP networks, CCTV systems, residential buildings, utility networks and smart-city installations. Enables powering cameras and wireless backhaul from a single switch with UPS functionality without downtime.

Package contents
Metal clamp, mounting kit, temperature sensor.

BASIC SPECIFICATIONS

Switch chip: 88E6193
Memory: 64 MB Flash
Ethernet ports: 8× Gigabit Ethernet
SFP+ ports: 2× 10G SFP+
PoE: 802.3af/at on ports Ether1–Ether8, max. budget 120 W
PoE current limit: 1000 mA (low voltage), 640 mA (high voltage)
Power input: 24–57 V DC (3× 2-pin terminal)
Battery charger: 0.2–1.6 A, 20–31.7 V
Supported batteries: flooded, AGM, gel, LiFePO4 (with BMS)
Power consumption: 7 W (no load), max. 181 W
Operating system: SwOS Lite
Enclosure rating: IP55
Operating temperature: -40 to +70 °C
Dimensions: 303 × 212 × 78 mm