Ubiquiti UniFi Switch Flex - 5x GbE, 1x PoE++ In, 4x PoE Out, outdoor - 3pack
(Code:NAPUBT1071)
To view the price and add product into cart, you need to be logged in.
| Code | NAPUBT1071 |
| PN | USW-Flex-3 |
| EAN | 817882028684 |
| Warranty | 26 months |
| WWW | Manufacturer's webpage |
| Brand |
UBIQUITI
Ubiquiti International Holding B.V.
|
Ubiquiti UniFi Switch USW-Flex 3-pack
A set of three compact 5-port gigabit Layer 2 switches with PoE++ support for indoor and outdoor deployment.
USW-Flex offers 5× GbE RJ-45 ports with a switching capacity of 10 Gbps and throughput of 5 Gbps. Port 1 serves as a PoE++ (802.3bt) input, while ports 2–5 provide PoE+ output with a maximum power of 25 W per port. The total PoE budget reaches up to 46 W when powered via a PoE++ switch or 60W PoE adapter.
The switch is managed through the UniFi Network application (version 5.10.3 and later) and supports features such as port isolation, port mirroring, jumbo frames, and egress rate limiting. The compact design allows mounting on a desk, wall, or pole in environments with temperatures ranging from –40 to +55 °C (at full 46 W PoE output).
Flexible PoE Power Input
USW-Flex supports three input power modes: PoE (802.3af/at) with an 8 W budget, PoE+ (802.3at) with a 20 W budget, and PoE++ (802.3bt) or a 60W PoE adapter with a 46 W budget. The switch's own power consumption without PoE output is 5 W; maximum power draw including PoE output is 51 W.
Software Requirements
The switch requires the UniFi Network application version 5.10.3 or later for management. Through the controller, you can configure ports, VLANs, traffic mirroring, monitor real-time statistics, and manage multiple sites from a single interface.
When installing the USW Flex switch with the USW Flex Utility box, the PoE injector mode must be software-enabled on the port in the UniFi controller settings. (Update: from UniFi OS 7.3.x and later, it is no longer necessary to manually enable the injector mode. The switch detects it automatically.)
KEY SPECIFICATIONS
Ports: 5× 10/100/1000 Mbps RJ-45 (1× PoE++ input, 4× PoE+ output)
Switching Capacity: 10 Gbps
Throughput: 5 Gbps
Forwarding Rate: 7 Mpps
Number of VLANs: up to 1,000
MAC Address Table: 2,000 entries
Max. PoE Power per Port: 25 W (PoE+)
Total PoE Budget: 46 W (PoE++ / 60W adapter), 20 W (PoE+), 8 W (PoE)
Power Input: PoE++ (802.3bt), 50–57 V
Max. Power Consumption: 5 W (without PoE), 51 W (including PoE)
Management: Ethernet In-Band, UniFi Network (version 5.10.3 and later)
ESD Protection: ± 16 kV air / ± 16 kV contact
Operating Temperature: –40 to +55 °C (46 W PoE) / –40 to +65 °C (25 W PoE)
Operating Humidity: 5 to 95% non-condensing
Dimensions: 122.5 × 107.1 × 28 mm
Weight: 230 g
Mounting: desktop, wall, pole
Installation Guide:
Ubiquiti UniFi Switch USW-Flex
Product price timeline.
Logistics parameters
- Weight: 1.07 kg
- Weight of packaging: 0.097 kg
- Width: 16.5 cm
- Height: 14.5 cm
- Depth: 15.5 cm
- Volume: 3708.4 cm3
- Qty: 1 pcs
