EPEVER TRC5215 MPPT Solar Regulator 50A, 12/24V, Input 150V, RV
(Code:SOPEPE0042)
| Stock availability: | |||
|---|---|---|---|
| Brno - main store | Prague - main store | ČB | |
| May be 14.8 | 12.8. | May be 14.8 | |
To view the price and add product into cart, you need to be logged in.
| Code | SOPEPE0042 |
| PN | TRC5215 |
| EAN | |
| Warranty | 26 months |
| WWW | Manufacturer's webpage |
| Brand |
EPEVER
EPEVER Technologies Europe B.V.
|
EPEVER TRC5215
Advanced MPPT controller with a maximum tracking efficiency of 99.5% and a conversion efficiency of 98.2% for efficient battery charging from solar panels.
The TRC5215 controller from the TRC series utilizes a new generation MPPT algorithm that significantly improves tracking accuracy and response speed, reduces power losses, and increases DC/DC conversion efficiency. It supports automatic 12/24 V battery voltage detection and allows direct load powering via the battery port at sufficient solar panel output through the battery-free mode.
The low-power design significantly reduces standby mode consumption to less than 10 mA, extending standby duration. The controller offers flexible communication interfaces with three optional combinations: 2× RS-485, RS-485 + CAN (RV-C), and RS-485 + LIN (CI-BUS). Isolated RS-485 interface and short-circuit protection enhance system reliability. Optional 4G/Wi-Fi modules enable remote monitoring, and the communication port can be enabled or disabled as needed.
- Maximum MPPT tracking efficiency ? 99.5% and conversion efficiency of 98.2% for minimal losses
- Battery-free mode support enabling direct load powering at sufficient solar panel output
- Automatic 12/24 V battery voltage detection with 50 A charging and discharging current
- Compatibility with LiFePO4, AGM, Gel, and flooded lead-acid batteries
- Flexible communication interfaces: 2× RS-485, RS-485 + CAN (RV-C), or RS-485 + LIN (CI-BUS)
- Parallel operation support via dedicated CAN port with RV-C protocol
Wide Battery Compatibility
The system supports various battery types including LiFePO4, AGM, Gel, and flooded batteries. Stable automatic activation of lithium batteries ensures reliable operation even at low state of charge.
Operating Conditions
The controller operates in a temperature range of -30 °C to +60 °C without derating at temperatures up to 40 °C. IP32 protection rating is suitable for installation in a sheltered environment. Maximum altitude without derating is 2,000 m; derating is required above this value.
BASIC SPECIFICATIONS
Maximum open-circuit voltage: 150 V (at lowest temperature), 138 V (at 25 °C)
MPPT voltage range: (battery voltage + 2 V) to 108 V
Nominal battery voltage: automatic detection 12/24 V
Charging current: 50 A
Discharging current: 50 A
Maximum charging power: 650 W at 12 V, 1300 W at 24 V
Output voltage range: 8–31 V
Idle consumption (communication on): 12 V/23 mA, 24 V/13 mA
Idle consumption (communication off): 12 V/7 mA, 24 V/5 mA
Maximum conversion efficiency: 98.2%
Communication: CAN (RV-C protocol), RS-485 (5 VDC/200 mA), LIN (CI-BUS COM protocol)
Operating temperature: -30 to +60 °C (no derating up to 40 °C)
Storage temperature: -40 to +70 °C
Relative humidity: ? 95% (non-condensing)
Protection rating: IP32
Dimensions: 211 × 195 × 96.5 mm
Weight: 2.5 kg
| Brand | |
| Type specification: | Regulator |
| Manufacturer: | EPEVER |
| Technical specification | |
| Maximum Power (W): | 1300 |
| Max. operating temperature (°C): | 60 |
| Min. operating temperature (°C): | -30 |
| Technology: | MPPT |
| Inputs and outputs | |
| Connector: | terminal |
| Power supply | |
| Rated Voltage (V): | 12/24 |
| Max. input voltage (V): | 150 |
| Max. output current (A): | 50 |
| Physical properties | |
| Depth (mm): | 96.5 |
| Weight (kg): | 2.5 |
| Width (mm): | 195 |
| Height (mm): | 211 |
Product price timeline.
Logistics parameters
- Weight: 2.5 kg
- Width: 22 cm
- Height: 10 cm
- Depth: 20 cm
- Volume: 4400 cm3
- Qty: 1 pcs
